> It cost more than $400, and it lasted less than half a year.
I have four of IQAir's indoor ones and one of their outdoor ones. I got the first one probably 8 or 9 years ago but the others maybe 3 or 4 years ago. The original one was made before iqair bought airvisual. They all are working fine currently.
Also, for the indoor ones, you can set DND mode (I forget the exact name they use) and it'll turn off the display during the night. Does have one downside I'll cover in a sec though.
That said, until this year I always just used their website to view the data or the app. It worked.. ok. But their graphs were tiny and not very easy to use. So this year I started digging in deeper and set tried to connect things to grafana. The indoor units have a samba share where you can pull down data, but the issue is they only update that data every 5-15 minutes (15 when its in DND mode).
The outdoor unit does NOT have a samba share. You need to use their API for that. Now this is where I'm really unhappy and eventually looking at AirGradient or some other option. In order to get api access to my data on the outdoor unit I either need to pay (a lot, I forget how much) for api access, or I can get free api access if I allow iqair to sell my data to everyone else.
.. not interested in that
So I'm currently only getting data from my indoor units and only getting every ~5-15 min data points.. but they are working. I did invest a lot in these devices so not ready to upgrade to anything different just yet, but every time I see one of these air quality topics pop up here on HN it really makes me want to change.
I am sure the sensor is fine and the weird USB port can be fixed (though it looked like they do not make it easy to disassemble the body). However, the device is just so janky and unpleasant to use I am not sure I want to go through the trouble. I started looking at Airthings, though I was recommended AirGradient as well.
> until this year I always just used their website to view the data or the app
Never used their app to check my own unit. My apartment is small. I am here in this room, the device is right here in this room, would I want to go fetch my phone to know the readings?
> Also, for the indoor ones, you can set DND mode (I forget the exact name they use) and it'll turn off the display during the night
Of course, but it means it should be within reach to turn on and it will blast blue light in my face should I want to check it at night. An e-ink screen would work best, considering low refresh rate is not an issue in this scenario.
> Of course, but it means it should be within reach to turn on and it will blast blue light in my face should I want to check it at night. An e-ink screen would work best, considering low refresh rate is not an issue in this scenario.
You can set a schedule. Mine automatically go into DND mode a little before bedtime and turn off after the sun is up.
Would you have a clock that requires being turned off at night, because it has an unbearably bright screen?
I personally don’t want to fumble through DnD mode whenever I thought to take a glance at carbon dioxide or PM2.5 while it’s dark outside.
There is only one thing I need from it, and that is to show air quality measurements in a non-painful way. Sadly, AirVisual Pro does not do that well for me.
I have four of IQAir's indoor ones and one of their outdoor ones. I got the first one probably 8 or 9 years ago but the others maybe 3 or 4 years ago. The original one was made before iqair bought airvisual. They all are working fine currently.
Also, for the indoor ones, you can set DND mode (I forget the exact name they use) and it'll turn off the display during the night. Does have one downside I'll cover in a sec though.
That said, until this year I always just used their website to view the data or the app. It worked.. ok. But their graphs were tiny and not very easy to use. So this year I started digging in deeper and set tried to connect things to grafana. The indoor units have a samba share where you can pull down data, but the issue is they only update that data every 5-15 minutes (15 when its in DND mode).
The outdoor unit does NOT have a samba share. You need to use their API for that. Now this is where I'm really unhappy and eventually looking at AirGradient or some other option. In order to get api access to my data on the outdoor unit I either need to pay (a lot, I forget how much) for api access, or I can get free api access if I allow iqair to sell my data to everyone else.
.. not interested in that
So I'm currently only getting data from my indoor units and only getting every ~5-15 min data points.. but they are working. I did invest a lot in these devices so not ready to upgrade to anything different just yet, but every time I see one of these air quality topics pop up here on HN it really makes me want to change.